Results 1 to 2 of 2
  1. #1
    Inactive sinclair.pixel is on a distinguished road sinclair.pixel's Avatar
    Join Date
    2012 Jan
    Thanked 28 Times in 5 Posts
    Rep Power

    AION autocraft + Guide


    What it does do

    released AionAutoCraft on the website above. AionAutoCraft is a macro that simulates keyboard- and mouse-strokes to automate crafting in Aion. The macro is played back by a tool called FreeMacroPlayer. Features of AionAutoCraft include:
    • Craft automatically for hours.
    • Supports all 6 professions for both Elyos and Asmodian.
    • Works on ALL Aion versions. Official and private servers.
    • Automatic skill upgrades at 99, 199 and 299 skill.
    • No memory reading/writing, so very low risk of detection.
    • Free of charge.

    Note that the word 'macro' in this context has nothing to do with Aion's ingame macro system.

    You can find the latest version of the macro at the download page. Please note that the script requires a version of the Macro Toolworks software.

    This script will automatically accept, craft, and turn in the second work order in the NPC's list. This work order is 10-19 skill points below you current skill. The macro will also automatically upgrade your profession if you are at 99, 199 or 299 skill points.
    To run the macro press Insert, and to stop the macro press Shift+Escape!
    Step-by-step guide:
    In Aion, bind Jump to the Insert key. This is very important!
    Run the Configuration Wizard macro (Ctrl+Insert) to configure the profession, the method of NPC selection, and character movement. Documentation on the configuration options is provided below in the Configuration Wizard section.
    The macro is calibrated for English Aion @ 1680x1050 by default. If you have a different resolution or language, you might need to run the Calibration Tool macro (Alt+Insert) to change the ingame button locations. You can find the details in the Calibration Tool section below.
    Abandon all current work orders.
    Make sure you have:
    Enough materials to gain the skill points you want to gain. The materials you need can be calculated here.
    Enough Kinah to automatically upgrade your profession at 99, 199 or 299 skill point (if you want that to happen).
    Plenty of free inventory space: you will get many workorder turn-in rewards, and if you inventory is full crafting will stop.
    With Aion running, set up your character position and ingame interface:
    Go to the crafting station, right-click it, and drag the crafting window to the top-right corner. This window should always remain open.
    Go to the crafting NPC and drag the dialog window to the top-left corner.
    Check the 'Available Only' button. It should look like this:

    Now close the NPC dialog window again, but leave the crafting window open.
    Position yourself between NPC and the crafting station. Try to find a position from where you can talk to the NPC and still be in range of the crafting station. This is not possible for every profession, but for tailoring it is, see above.
    Next, assuming you configured the Top-Left positioning scheme, you need to change your camera angle so the NPC is in the top-left corner of the screen. Take a birds-eye view to minimize the risk of other players obstructing the NPC.

    Assuming you picked top-left positioning, tailoring profession and no movement in the Configuration Wizard, you are now ready to start crafting. Press Insert to start crafting. Remember not to touch the mouse and keyboard while the macro is running!
    To stop the macro press Shift+Escape. You can change this shortcut in FreeMacroPlayer's settings.

    Configuration Wizard
    Press Ctrl+Insert to start the configuration wizard. Use it to change the current profession, as well as other options.
    Crafting NPC Selection Method Setting
    Top-left corner click method: Simulates a right-click in the top-left corner of the screen to select the NPC. The NPC must be in range and in the top-left corner of the screen, as demonstrated above. This is the most reliable, recommended method.
    /Select-/Attack method: Simulates keystrokes to select the NPC. The macro will enter the command /Select <npcname> followed by /Attack, opening the dialog window if the NPC is in range. Less reliable than the top-left method, but you do not need line-of-sight to the NPC.

    Profession Setting
    Select the correct profession here. The positions of interface elements are different for each profession, so choose carefully.

    Movement Settings
    If you can find a character position in range of both the crafting NPC and the crafting station you should select No Movement for both options.
    Sometimes it is not possible to find a position in range of both. If this is the case, you can configure the macro move your character before and after talking to the NPC. As an example look at Elyos Handicrafting:

    Your character needs to move backward after talking to the NPC, and forward after crafting. Select configuration options Move backward 2s and Move forward 2s respectively. Now, get in a position where walking forward and backward will move you along the line, and make sure you have objects at the end to obstruct you. If you are positioned properly, even when holding forward and backward indefinitely, your character will never stray off this line.
    Now position the camera so the NPC is in the top-left and open your crafting window like usual, to get this setup:

    If you now run the macro, your character will: accept the work order, move backward for two seconds, craft the work order, move forward for two seconds, and turn in the work order.

    Miscellaneous Settings
    Choose the highest number to which you will be leveling your character's skill points. If you craft at level that is higher than your settings, the wait time will be too short and the macro breaks. The current wait times are:
    At most 99: 70 seconds
    At most 199: 110 seconds
    At most 299: 240 seconds
    At most 399: 240 seconds
    If you check the Do automatic skill upgrades checkbox, the macro will attempt to upgrade your skillpoints automatically after each workorder. If you disable this feature, the macro will remain stuck at 99, 199 or 299 skill points.

    With the Print Configuration macro (Shift+Insert) you can view the current configuration.

    Calibration Tool
    If your resolution is 1680x1050, and you have the English version of Aion, AionAutoCraft will know the correct the locations of the buttons in the in-game interface. Otherwise you might need to re-calibrate the macro using the calibration tool provided with AionAutoCraft.
    Press Alt+Insert to start the calibration tool. Make sure Aion is running!
    First, select the type of calibration you want to do. Calibrate General Elements is for elements that do not change positions at different crafting NPC's. In addition, some elements must be calibrated separately for each profession.
    Example: if you want to craft Alchemy workorders, you will need to recalibrate AT LEAST the General Elements and the Alchemy Elements.

    Calibrate Profession-specific Elements
    If you select Calibrate General Elements you will see this screen:

    It's quite simple: Click OK to maximize Aion -> hover your cursor over the requested button -> press the Insert key. Rinse and repeat until all 4 steps are done. Remember to put the NPC dialog in the top-left, and the crafting dialog in the topright!
    An image of the General calibration points is displayed below:

    Calibrate General Elements
    If you select Calibrate Profession-Specific Elements you will see this screen:

    Select the profession you want to calibrate. Go to the corresponding crafting NPC in Aion. The calibration points are:

    Now you are done calibrating this profession.

    **using it is at your own risk

  2. The Following User Says Thank You to sinclair.pixel For This Useful Post:

  3. #2
    Inactive scottastic is on a distinguished road
    Join Date
    2012 Jun
    Thanked 0 Times in 0 Posts
    Rep Power

    good stuff

    nice i like but honestly macro goblin is awesome for crafting if u wanna see it let me know ill share a video of it

Similar Threads

  1. [Hack] Aion Pak Extractor
    By CriticalError in forum Aion
    Replies: 16
    Last Post: 2013-07-13, 09:54 PM
  2. AION 2.7 Offsets
    By sinclair.pixel in forum Aion Bots, Hacks, Cheats
    Replies: 0
    Last Post: 2012-02-14, 10:25 PM
  3. Aion Mate
    By a4123278 in forum Aion Bots, Hacks, Cheats
    Replies: 1
    Last Post: 2010-12-18, 10:11 PM
  4. [Guide] Beginners Guide to Martial Empires
    By Dwar in forum Martial Empires
    Replies: 1
    Last Post: 2010-11-29, 03:16 PM
  5. [Guide] AngelBot setup, Starting guide
    By Dwar in forum Aion Bots, Hacks, Cheats
    Replies: 0
    Last Post: 2010-11-29, 02:55 PM
Visitors found this page by searching for:

aion alchemie bot

aion auto bot

aion auto craft

aion autocraft

aion alchemy macro


aion crafting macro

aion auto craft bot

bot craft aion

aion autocraft guide

aion craft macro

aion alchemy bot

aion craft bot free

aion work order bot

aion bot free download

bot metier aion

aion craft bot download

Aion Macro bot

crafting bot aionaion work order macroaion autocraft botaion autocraft macroaion craft hackaion bot metiermacro bot aion


Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts